Unloader Tube PTFE 13.5" Long (Teflon) #116343

Old Part Numbers: ST117802AV13.5" long teflon unloader tube.

Compression Adapter, 1/4" Tube 1/8" NPT #116345

Old Part Numbers: ST011701AV1/8" MPT x 1/4" compression adapter for unloader line.

Compression Conn Fitting Assembly 1/2 X 3/8 MPT #01A902

Old Part Numbers: ST159001AV, ST159001AJCompression Connector, 1/2" Comp X 3/8" MPT. 

KEY .1875 SQX1.44 LONG #01A97A

Filter Element, Felt #01A8EE

PIPE PLUG 14-18 NPT #01A8C6

Old Part Numbers: STD-220, ST022000AV, ST072915AV, ST072917AV1/4-18 IND HX HD

SHAFT KEY 3/16 X 1 #01A8C8

Old Part Numbers: PM004904AVFor flywheel.

Screw #01A8B8

New Pump with Flywheel #01AFAF

Old Part Numbers: VT482200AJ, VT480000KB, VT480000AV, VT481400AJ, VT470200KBHas a 38mm stroke. Used on 120V Electric units. Note: New style pump has only one airline coming off of the pump head. Order the CTD1238ADAPTKIT if your old pump...

VT4923 Air Compressor Pump Replacement, Complete Assembly, Single-Stage #01AAE1

Old Part Numbers: VT470401KB, VT472200AJ, VT490000AV, VT471400AJ, VT232605KB, VT470000KB, VT490000SJ, VT470000AJ, VT4723  Complete pump with flywheel and air filter assembly. Has a 55mm stroke. Campbell Hausfeld VT2030, VT4723, VT4923 Twin Cylinder...

Needle Bearing Conrod #01AA2D

ASME SAFETY VALVE 140 PSI 1/4 NPT #01ACAC

Old Part Numbers: V-203600BLRating 140 PSI If your valve leaks below the pressure listed on the side of the valve, replace this vital safety feature. Used with WL650801.

Cylinder HEAD RPLCMT KIT, VT #01A8AE

Old Part Numbers: VT-4, VT252901AJ, VT273200AJOrder this kit for older VT pumps using this style gasket Kit includes: head, bolts, filter, gasket, tube, etc. Note: New style pump head has only one air line coming off of pump head. If your old pump had 2...

MOLDED FERRULE, 1/2" #01AF4F

Old Part Numbers: ST067300AV, HF004500AV

WASHER PLAIN TYPE A 516N ZINC #01A97E

Old Part Numbers: ST070930AV, AL136000AV

VT Valve Kit 1-PC Head, WWG #01A8A0

Old Part Numbers: MP244400AJ, 1R397Valve kit for toilet seat-shaped valves w/ 2 screws on each valve (less gaskets). Click here for instructions.

Hex Mach Head #01ABB5

CYLINDER AIR #01BE57

Retaining Ring #01B038

Old Part Numbers: ST070236AV

SET SREW 38-16 X 34 #01A8CE

For flywheel, (standard thread, not metric).

SCR SELF T.516-12 X 34 SCREW #01A9A8

Old Part Numbers: ST016500AV

Compression Nut #01AF47

Compression Nut

Comp Fitting #01B024

Piston Service Kit #01A8BC

Old Part Numbers: VT-55, VT005501AGReplace this if the rings do not rotate freely in their grooves. Note: Kit does not include rings

VT Piston Ring Set #01A8F6

Old Part Numbers: 1R398, TQ900700AJThis kit will NOT fit pumps with 3" Piston! For v-twin pumps, order qty. 2 for a complete ring set! Includes rings for both pistons. This kit contains two different style rings. Install rings that match the ones being...

PLUG 1/8-27 IND HX HD #01ACAA

Gasket-inlet #01A8EA

Fits between head and filter assby. (old style)

O-RING VT HEAD #01B4F5

Piston Pin #01A8BA

Oil Seal #01A8CC

VT GASKET KIT #01B509

Includes all necessary gaskets for normal rebuild.

CONN ROD MACHINED #01A8C2

Old Part Numbers: VT-1, VT000100AGPlease Note: These new style rods are thinner than the original. The rod will have no movement once the cylinder is in place. Length: 5 7/8"